18-Port Gigabit PoE+ Switch

TPE-TG182 (Version V1)

16 x Gigabit PoE+ ports (up to 30W per port)
2 x Gigabit SFP Slots
240W PoE power budget
36Gbps switching capacity
Internal power supply
Sturdy 1U 19” rack-mountable metal housing
NDAA / TAA compliant (U.S. and Canada only)

TRENDnet’s Unmanaged Gigabit PoE+ Switches provide high-bandwidth performance, ease of use, and reliability. These IEEE 802.3at compliant switches conveniently feature a sturdy 1U 19” rack-mountable metal housing with mounting brackets included. These gigabit PoE+ switches with SFP slots also support long-distance fiber network applications.

Installers and integrators can save on equipment costs and reduce installation time with TRENDnet’s unmanaged gigabit PoE+ switches by delivering up to 30W per port of PoE+ power and data over existing Ethernet cables. Easily network PoE devices, such as high-power wireless access points, PTZ cameras, digital signage, IPTV decoders, and access controls with these reliable gigabit PoE+ switches with SFP support.

Illustration of a network cable labeled 36Gbps SWITCHING CAPACITY with icons representing music, video, data transfer moving through the network.

Gigabit Ports

Gigabit ports feature a full switching capacity on this rackmount PoE+ switch, with SFP slots for long-distance fiber applications.

An illustration of a rackmount with four switches installed.

Hardware Design

With a sturdy metal housing and rackmount brackets included, this switch is well-suited for 19” 1U rack installations.

A network diagram of 18-Port Network Switch, connected to PoE Camera and wireless access point device up to 240 Watt.

PoE Power

A 240W total PoE power budget supports 16 PoE+ devices with up to 30W per port.

The illustration depicts a two-story building with various security and networking equipment. The exterior features surveillance cameras mounted on the building and a pole, monitoring the parking area and surroundings. Inside, the first floor contains a room filled with multiple stacks of boxes and a server room with two server racks. The second floor includes an office area with desks, computers, and chairs, as well as a lounge area with a sofa and a table. A highlighted section points to a network switch labeled TPE-TG182, indicating its placement within the building's network infrastructure.

The visual shows a TRENDnet Gigabit PoE+ Switch model TPE-TG182. The front view of the switch highlights several key features. On the left side, there are LED indicators that provide status information. In the center, there are 16 Gigabit PoE+ ports, which are used to connect and power network devices. On the right side, there are 2 Gigabit SFP slots for fiber optic connections. The rear view of the switch shows the power input. This switch is relevant for network setups requiring multiple PoE+ connections and fiber optic connectivity.

Hardware Design

With a sturdy metal housing and rackmount brackets included, this PoE+ gigabit switch with SFP slots is well-suited for 19” 1U rack installations

PoE Power

A 240W total PoE power budget supports 16 PoE+ devices with up to 30W per port

Gigabit Ports

Gigabit ports feature a full switching capacity to this gigabit PoE+ switch, with fiber SFP support for long-distance fiber applications

Jumbo Frame

Sends larger packets, or Jumbo Frames, for increased performance

LED Indicators

LED indicators on this PoE+ switch with SFP slots conveniently convey port status

Standards	IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at
Device Interface	16 x Gigabit PoE+ ports 2 x Gigabit SFP slots LED indicators
Data Transfer Rate	Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) SFP: 2000Mbps (full duplex)
Performance	Data RAM Buffer: 512KB Switch Fabric: 36Gbps MAC Address Table: 8K entries Forwarding rate: 23.8Mpps (64-byte packet size) Jumbo Frame: 10KB
Power	Input: 100 – 240V AC, 50/60Hz, internal power supply Max. consumption: 40W (no PD)
PoE	PoE budget: 240W PoE Mode A: Pins 1, 2, 3, and 6 for power Over current protection Short circuit protection
Fan/Acoustics	Quantity: 1 Max. noise Level: 26dB
MTBF	659,157 hours
Operating Temperature	0° – 40° C (32° – 104° F)
Operating Humidity	Max. 90% non-condensing
Dimensions	324 x 230 x 44mm (12.75 x 9 x 1.8 in.)
Weight	2.5kg (5.68 lbs.)
Certifications	CE FCC ETL
Warranty	3 year

PACKAGE CONTENTS

TPE-TG182
Quick Installation Guide
Rack mount kit
Power cord (1.5m/4.9 ft.)

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.