Item
Setting
LAN IP Address

Subnet Mask

WAN Type


Activate WWAN for Auto-Failover

Enable
    Remote Host for keep alive: 
WAN IP Address

WAN Subnet Mask
WAN Gateway
Primary DNS
Secondary DNS
NAT disable
Enable
Host Name
(optional)
ISP registered MAC Address
Connection Control
NAT disable Enable
Session Enable
PPPoE Account 1

PPPoE Password
Primary DNS
Secondary DNS
Connection Control
Maximum Idle Time seconds
PPPoE Service Name (optional)
Assigned IP Address (optional)
MTU (0 is auto)
NAT disable Enable
IP Mode

My IP Address
My Subnet Mask
Gateway IP
Server IP Address/Name
PPTP Account
PPTP Password
Connection ID (optional)
Maximum Idle Time seconds
Connection Control
MTU (0 is auto)
IP Mode

IP Address
Subnet Mask
WAN Gateway IP
Server IP Address/Name
L2TP Account
L2TP Password
Maximum Idle Time seconds
Connection Control
MTU (0 is auto)

Dial-Up Profile

Auto-Detection   Manual

Country


Telecom


3G Network


APN

(optional)

PIN Code

(optional)

Dialed Number


Account

(optional)
Password (optional)

Authentication

Auto  PAP  CHAP 

Primary DNS

(optional)

Secondary DNS

(optional)

Connection Control


Maximum Idle Time      seconds
Keep Alive Disable
LCP Echo Request
Interval  seconds
Max. Failure Time  times
Ping Remote Host
Host IP
Interval  seconds
Account

Password
Primary DNS
Secondary DNS
Connection Control
Maximum Idle Time seconds
Service Name (optional)
Assigned IP Address (optional)
MTU (0 is auto)
NAT disable Enable