LLDP Management Help

Use this page to change LLDP parameters.

LLDP Configuration

LLDP Status:

Enable/Disable LLDP.

LLDP hello time:

You can change LLDP hello time value. The time interval between the transmission LLDP info packets. Value range is from 5 to 32768. Default value is 30.

LLDP hold time:

You can change LLDP hold time value. (The hold time * the hello time) is the TTL time in the LLDP info packets. Value range is from 2 to 10. Default value is 4.

กก

Configure Port Status

กก

Port Status:

You can change LLDP port status to Tx_only/Rx_only/Tx_and_Rx/Disable. Tx_only: LLDP transmit the packet of the port only. Rx_only: LLDP receive the packet of the port only. Tx_and_Rx: LLDP transmit and receive the packets of the port. Disable:  LLDP do not transmit and receive the packets of the port.