Dynamic IP (Cable modem)
A Cable modem requires minimal configuration. When you have set up an
account with your Cable provider, the Cable modem will automatically
configure itself, so you probably do not need to enter anything more.
However, if there is a Domain Name System (DNS) server that you would
rather use, you need to specify the IP address.
Static IP (Fixed-IP xDSL)
Some xDSL Internet Service Providers may assign a fixed IP address for your
Broadband Router. If you have been provided with this information, choose this
option and enter the assigned IP address, subnet mask, gateway IP and DNS
IP addresses for your Broadband Router.
PPPoE (Dial-Up xDSL)
If you connect to the Internet using an xDSL Modem and your ISP has
provided you with a password, and Service Name, then your
ISP uses PPPoE. You must choose this option and enter the required
If your ISP provided you the PPTP Account, PPTP Password, Host Name,
Service IP Address, IP Address, Subnet Mask and the Connection ID, then
your ISP uses PPTP. You have to choose this option and enter the required information.
The Setup Wizard has completed. Click on Back to modify changes or mistakes. Click Restart to save the current settings and reboot the System.
Please wait seconds