IPV6

Use this section to configure your IPv6 Connection type. If you are unsure of your connection method, please contact your Internet Service Provider.

IPv6 Connection Type

Choose the mode to be used by the router to the IPv6 Internet.

My IPv6 Connection is: Link-local only Static IPv6 SLAAC/DHCPv6 PPPoE

Wan IPv6 Address Settings

Enter the IPv6 address information provided by your Internet Service Provider (ISP).

IPv6 Address: Subnet Prefix Length: Defautl Gateway:

PPPoE

Enter the information provided by your Internet Service Provider (ISP).

User Name: Password: Service Name: (Optional. It should be consistent with the setting of PPPoE Server or empty.) AC Name: Idle Time: (1-1000 minutes) MTU Size: Connection Type: Continuous Connect on Demand Manual

IPv6 DNS Settings

Obtain DNS server address automatically or enter a specific DNS server address.

Obtain DNS server address automatically Use the following DNS address Primary DNS Address: Secondary DNS Address:

Lan IPv6 Address Settings

Use this section to configure the internal network setings of your router. If you change the LAN IPv6 Address here, you may need to adjust your PC's network settings to access the network again.

Enable DHCP-PD: LAN IPv6 Address: /64 LAN IPv6 Link-Local Address: fe80::205:1dff:fe03:405/64

Addess Autoconfiguration Settings

Use this section to setup IPv6 Autoconfiguration to assign IP addresses to the computers on your network.

Enable Autoconfiguration: Autoconfiguration Type: SLAAC + Stateless DHCPv6 Stateful(DHCPv6) Router Advertisement Lifetime: (minutes) IPv6 Address Range(Start): ::00 IPv6 Address Range(End): ::00 IPv6 Address Lifetime: (second)