WAN Interface Setup This page is used to configure the parameters for Internet network which connects to the WAN port of your Access Point. Here you may change the access method to static IP, DHCP or PPPoE by click the item value of WAN Access type. WAN Interface WAN Access Type: Static IP DHCP Client PPPoE IP Address: Subnet Mask: Default Gateway: MTU Size: Host Name: MTU Size: User Name: Password: Service Name: (Optional. It should be consistent with the setting of PPPoE Server or empty.) AC Name: Idle Time: (1-1000 minutes) MTU Size: Static IP Address: Connection Type: Continuous Connect on Demand Manual Attain DNS Automatically: (Need to repair the connection of your PC if DNS configuration changed.) Set DNS Manually: DNS Server 1: DNS Server 2: (Optional) DNS Server 3: MAC Clone Default MAC MAC from PC MAC manual
This page is used to configure the parameters for Internet network which connects to the WAN port of your Access Point. Here you may change the access method to static IP, DHCP or PPPoE by click the item value of WAN Access type.