LAN Interface Setup

This page is used to configure the LAN interface of your Wireless Router. Here you may change the setting for IP addresss, subnet mask, etc. This page can be used to config the DHCP mode:None or DHCP Server. (1)Enable the DHCP Server if you are using this device as a DHCP server. This page lists the IP address pools available to hosts on your LAN. The device distributes numbers in the pool to hosts on your network as they request Internet access. If you choose "None", then the router will do nothing when the hosts request a IP address. (2)This page lists the fixed IP/MAC address on your LAN. The device distributes the number configured to hosts on your network as they request Internet access.

LAN Interface Setup

IP Address: Subnet Mask:

DHCP Server Settings

DHCP Mode: None DHCP Server IP Pool Range: -   Max Lease Time: minutes Domain Name: DNS Server 1: DNS Server 2:  (Optional) DNS Server 3: Relay Server:

  

DHCP Static IP Configuration

IP Address: Mac Address: (ex. 00E086710502)

        

DHCP Static IP Table

Select IP Address MAC Address