LAN IP Address is the IP address of this product. It must be the default gateway of your computers.
WAN Type is
Static IP Address
3G
iBurst
Dynamic IP Address
Dynamic IP Address with Road Runner
PPP over Ethernet
Multisession PPPoE
PPTP
L2TP
Dial-up Network
. If the WAN type is not correct, change it!
- WAN IP Address , Subnet Mask , gateway , Primary and Secondary DNS:
enter the proper setting value provided by your ISP.
- Host Name: optional. Required by some ISPs, e.g. @Home.
- Renew IP Forever: this feature enables the router to renew the IP address automatically when the lease time expires, even when the system is in an idle state. It also allows the router to automatically connect to the ISP after the system is restarted or the connection is dropped.
- PPPoE Account and Password:
The account and password your ISP assigned to you.
If you don't want to change the password, keep it empty.
- Primary and Secondary DNS: automatically assigned if they are configured as "0.0.0.0".
- Maximum Idle Time: the time of no activity to disconnect your PPPoE session. Set it to zero or enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will automatically connect to ISP after system is restarted or connection is dropped.
- PPPoE Service Name: optional. Input the service name if your ISP requires it.
- Assigned IP Address: optional. Required by some ISPs.
- My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned to you.
- Server IP Address: the IP address of the PPTP server.
- PPTP Account and Password: the account and password your ISP assigned to you. If you don't want to change the password, keep it empty.
- Connection ID: optional. Input the connection ID if your ISP requires it.
- Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to zero or enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will automatically connect to ISP after system is restarted or connection is dropped.
- IP Address and Subnet Mask: the private IP address and subnet mask your ISP assigned to you.
- Server IP Address: the IP address of the L2TP server.
- L2TP Account and Password: the account and password your ISP assigned to you. If you don't want to change the password, keep it empty.
- Maximum Idle Time: the time of no activity to disconnect your L2TP session. Set it to zero or enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will automatically connect to ISP after system is restarted or connection is dropped.
- Dial-up Telephone, Account and Password: enter the proper setting value provided by your ISP. If you don't want to change the password, keep it empty.
- Primary and Secondary DNS : automatically assigned if they are configured as "0.0.0.0."
- Maximum Idle Time : the time of no activity to disconnect your dial-up session. Set it to zero or enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will automatically connect to ISP after system is restarted or connection is dropped.
- Baud Rate : the communication speed between this product and your MODEM or ISDN TA.
- Assigned IP Address: optional. Required by some ISPs.
- Extra Setting: needed to optimize the communication quality between the ISP and your MODEM or ISDN TA.
Function of Buttons
Virtual Computers... |
You can click this button to setup mappings of multiple global IP addresses and local IP addresses. |
Function of Buttons
Virtual Computers... |
You can click this button to setup mappings of multiple global IP addresses and local IP addresses. |
|