Management

This screen enables you to set up SNMP and remote management features.

Click the items below for more information.

 

 

SNMP

This screen enables you to configure SNMP.

Enabled/Disabled: Click to enable or disable SNMP.

System Name: Displays the name given to the router.

System Location: Displays the location of the router (normally, the DNS name).

System Contact: Displays the contact information for the person responsible for the router.

Community: SNMP system name for exchanging SNMP community messages. The name can be used to limit SNMP messages passing through the network. The default name is 'private.'

Trap Receiver: Type the name of the destination PC that will receive trap messages.

back to top

 

 

Remote Management

This screen enables you to set up remote management. Using remote management, the router can be configured through the WAN via a Web browser. A user name and password are required to perform remote management.

HTTP: Enables you to set up HTTP access for remote management.

  • Enable: Click to enable or disable HTTP access for remote management.

  • Remote IP Range: Type the range of IP addresses that can be used for remote access.

Allow to Ping WAN Port: Type a range of router IP addresses that can be pinged from remote locations.

back to top

UPNP

UPnP is short for Universal Plug and Play which is a networking architecture that provides compatibility among networking equipment, software, and peripherals. The Router is a UPnP enabled router and will only work with other UPnP devices/softwares. If you do not want to use the UPnP functionality, it can be disabled by selecting "Disabled".

back to top

 

 

Gaming Mode

If you are experiencing difficulties when playing online games or even certain applications that use voice data, you may need to enable Gaming Mode for these applications to work correctly. When not playing games or using these voice applications, it is recommended that Gaming Mode is disabled.

back to top