IP QoS

     

Entries in this table are used to assign the precedence for each incoming packet based on physical LAN port, TCP/UDP port number, and source/destination IP address/subnet masks.
IP QoS: Disabled   Enabled	Default QoS:	IP Pred802.1p

Specify Traffic Classification Rules
Source IP:        Netmask: Port:
Destination IP: Netmask: Port:
Protocol:         TCP UDP ICMP         Physical Port: LAN1 LAN2 LAN3 LAN4 usb0
Assign Priority and/or IP Precedence and/or Type of Service and/or DSCP
Outbound Priority:	p3(lowest) p2 p1 p0(highest)	802.1p: 0 1 2 3 4 5 6 7
Precedence:   0 1 2 3 4 5 6 7	TOS:   Normal Service Minimize Cost Maximize Reliability Maximize Throughput Minimize Delay

IP QoS Rules:

	Traffic Classification Rules						Mark
Select	Src IP	Src Port	Dst IP	Dst Port	Protocol	Lan Port	Priority	IP Precd	IP ToS	Wan 802.1p