TRENDnet | Support | FAQ | TE100-P21 | I have double checked my hardware connections and have verified that everything is connected properly, but I still cannot connect to my printer after
I have double checked my hardware connections and have verified that everything is connected properly, but I still cannot connect to my printer after I typed in the server name and printer name.
FAQ ID: 90   Updated: 2/2/2005 3:47:31 PM
Make sure that you are typing the correct printer name. If your USB printer is connected to the USB2 slot, then use the Printer Name that is by the USB2 heading in the web configuration utility. (See 4. Configure the Print Server)

Was this information helpful?
Related FAQs:
Attachments:
No attachments found.