I configured my print server to automatically receive an IP Address from a DHCP server, and now I cannot go into the print server's web utility.

Open PS-Utility v2.00 (See 4. Configure the Print Server) to locate your Print Server's IP address. For MAC users, press the Reset button at the back of the TE100-P1U, hold the button for 15 seconds, release the button, and enter in a web browser to access the web utility feature.
FAQ ID: 87
Created: 2/2/2005
Modified: 2/2/2005
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5