How do I configure my TBW-103UB if my access point has WEP encryption enabled?

Step 1 Double-click on the wireless icon in your System Tray.

Step 2 Select “802.11g USB 2.0 WLAN Dongle” from the Network Adapter drop down menu. Next double-click the SSID you wish to connect to within the Available Network window.

Step 3 The following window will pop-up. If this is the first time you are connecting to this network or you are changing your network key click No.

Step 4 Click Change.

Step 5 Enter the your encryption values and keys into the appropriate fields, click Apply then close the window.

Step 6 Verify the connection status by checking the Link Status, Signal Strength and Link quality fields.

FAQ ID: 770
Created: 3/7/2006
Modified: 3/7/2006
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5