How do I configure a VPN tunnel with both sides having static IP addresses?

Use the following screenshots as a guide.

Scenario

PC1 (192.168.1.x)-BRV204 (66.135.11.92) ~ BRV304 (64.11.212.22)–PC 2 (192.168.2.x) Simply match both ends information. After the connections are created, 192.168.1.x should be able to ping 192.168.2.x.

Settings on BRV204

Settings on BRV304

FAQ ID: 765
Created: 1/30/2006
Modified: 1/30/2006
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5