Why does my utility only have three tabs?

The “Windows Wireless Zero Configuration Utility” is controlling the adapter. Click on Start then Run and type in “ncpa.cpl”, without the quotes and hit enter.

This will open the Network Connections window. Right click on your wireless network connection and click on properties.

Click on the Wireless Networks tab and uncheck “Use Windows to configure my wireless networks” at the top. The Wireless Configuration Utility should now have all seven tabs.

FAQ ID: 504
Created: 9/19/2005
Modified: 9/19/2005
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5