I specified the IP address 192.168.0.1 in my Web browser, but an error message says "The page cannot be displayed". How can I get into the TW100-BRM504 web configuration page?

Please check your hardware and TCP/IP settings again by following the instructions in sections 1-3, make sure the Power, WAN, and on the LAN LEDs are on. Then try to access the configuration page using your Web Browser again.
FAQ ID: 334
Created: 2/3/2005
Modified: 2/3/2005
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(3.7)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5