How do I make a successful link with my TRENDnet SFP module?

Transmit and Receive connectors will be inverted on the remote side. The fiber will not link if you connect a Transmit and Receive interface to the Transmit and Receive interface on the remote side. TX to RX and RX to TX.
FAQ ID: 3292
Created: 10/25/2017
Modified: 10/25/2017
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5