How do I create a link between two points using fiber converters?

To establish a link, both the fiber and copper ports must be connected. Connecting only the fiber cables will not produce a link. Gigabit converters must be connected to Gigabit on the copper side. They will not link to a Fast Ethernet copper port. On the fiber interface, the Transmit and Receive connectors will be inverted on the other side. TX to RX and RX to TX.
FAQ ID: 3290
Created: 10/25/2017
Modified: 10/25/2017
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5