I specified the IP address 192.168.0.1 in my web browser, but an error message says "The page cannot be displayed." How can I get into the TW100-BRF114U web configuration page?

Please verify your hardware and TCP/IP settings again by following the instructions in sections 2-3, and make sure the Power, WAN, and the LAN lights on the AP/Router's front panel are on. Then, try accessing 192.168.0.1 again using your web browser.
FAQ ID: 328
Created: 2/3/2005
Modified: 2/3/2005
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(1.1)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5