Iím not getting a link light. What should I check?

Test all cables to ensure the issue is not related to faulty cables. Check all physical connections to ensure they are terminated on active connections. Ensure both the fiber and copper connections must be connected for a successful link. Ensure the fiber cable is connected from RX to TX / TX to RX.
FAQ ID: 3263
Created: 1/10/2017
Modified: 1/10/2017
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5