How do I create a tagged VLAN in the TEG-424WS?

Answer: For this example we are going to create 2 separated VLANs with a shared port.

VLAN 10: Tagged ports: 1 Untagged ports: 2 – 9
VLAN 20: Tagged ports: 1 Untagged ports: 15-20

Click Bridge > VLAN > Tagged VLAN. Input the VLAN ID and the VLAN Name under Tagged VLAN Settings. For this example the first VLAN will have a VLAN ID of 10.  A VLAN Router will occupy port 1. Under the Static Tagged section select port 1. Under the Static Untagged section select ports 2-9 then click Apply.

For the second VLAN will have a VLAN ID of 20. Under the Static Tagged section select port 1.  Under the Static Untagged section select ports 15-20 then click Apply.

After you have created your VLANs click Port Settings.  Port 1 will remain on the default PVID.  Ports 2 -9 will be assigned PVID 10.  Ports 15-20 will be assigned PVID 20.  After setting the PVID values please make sure to press the Apply button for each port.   Devices on ports 2-9 will not be able to access devices on ports 15-20 but both VLANs will be able to access the Router on port 1. 

FAQ ID: 3183
Created: 4/3/2015
Modified: 4/3/2015
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5