Can I setup the TV-NVR104K to send email alerts when motion is detected?

Answer: After you have setup motion detection right click on the camera then click Menu.

Click Configuration

Click Network then Email

Configure the email settings then click Test to ensure the settings are correct. After you have confirmed the settings are correct click Apply then Back.

This will take back the Menu.  Click Camera.

Click Motion.

Select Settings.

Click Linkage Action, select Send Email then click Apply.

FAQ ID: 3170
Created: 3/24/2015
Modified: 3/24/2015
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5