Iím not getting a connection through the TPL-420E units. What should I do?

Answer: Plug the TPL-420E directly into an outlet.† Avoid connecting them to extension cables, power strips or surge protectors.† The TPL-420E has built-in surge protection† ††Reset the units and ensure they are configured with the same Network ID or use the sync button to connect them.††
It is not recommended to use this product on electrical systems that use AFCI circuit breakers or plugged into GFI protected outlets as this may cause performance degradation or loss in connectivity.

FAQ ID: 3157
Created: 3/23/2015
Modified: 3/23/2015
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5