How do I setup sound recording with the TV-743SIC?

Answer: Open your web browser and in the address bar, enter the camera cloud access address showed on the bottom on your camera.

Enter admin as the username and the password you setup and then click Login.

Click Setup > Sounds Detection. Click enable and set the Detection Sensitivity Level then click Apply.

Under Action there is 3 different options. For this example we are going to setup Video Clip with email notification.

Check enable and for Triggered by click the drop down menu and select Sound. Under Target select E-mail. Fill in all the fields then click Test to verify that the settings are correct. Once you have confirmed the settings click Apply.

Snapshot also has email notification as well and is setup the same way.

FAQ ID: 3148
Created: 9/12/2014
Modified: 9/12/2014
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5