I have gone through the Setup Wizard but still am not able to go online. What should I check?

Please verify all settings with your ISP. You will need the correct VPI and VCI values. Please also verify if they require the use of a Service Name. Check to see if the require a specific MTU value as well. When you have gathered this information do the following to apply them to the TEW-718BRM.

Log into the TEW-718BRM by going to http://192.168.10.1

The default username and password are both admin.

Navigate to the Setup> Internet Setup page. Enter in the settings supplied by your ISP then click Apply to save the settings.

FAQ ID: 3079
Created: 4/9/2014
Modified: 4/9/2014
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5