How do I sync the TPL-410AP to my existing Powerline Network?

Press and hold the sync button for 2 seconds and you will see the power LED start to blink. Go the one of remotes units and press the sync button for 2 seconds.
FAQ ID: 3062
Created: 2/19/2014
Modified: 2/19/2014
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(1.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5