How do I setup a static IP address on my Mac?

Step 1: Click the Apple logo in the top left corner of your screen.  Click System Preferences… and then Network under the Internet and Wireless section.

Step 2: Select Ethernet in the left pane.  Under Configure IPv4 select Manually.  Assign the adapter the following IP address then click Apply.

IP Address: 192.168.10.10
Subnet Mask: 255.255.255.0

After you have configured the TEW-737HRE return the Configure IPv4 setting back to Using DHCP.

FAQ ID: 3058
Created: 12/17/2013
Modified: 12/17/2013
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5