If I am unable to wirelessly connect to the TEW-737hre for the initial setup how should I proceed?

Connect a computer directly to the TEW-737HRE’s Ethernet port. Allow the TEW-737HRE to boot up and then enter http://tew-737hre into the address line of your browser.

Note: If you have a Mac, you will have to setup a static IP address on your computer and use http://192.168.10.100 to access the TEW-737HRE. For instructions on how to setup a static IP address for your Mac, click here.

Enter the Username and Password and then click Login. For added security the TEW-737HRE is preconfigured with a unique password. Locate the password on the device label.

Under Wireless, select Wi-Fi Settings and then click the Site Survey button.

Select the wireless network you want to connect to and then click the Connect button.

If the network was secured, you will be prompted to enter in the encryption key (Passphrase). Enter the key, confirm it and then click the Apply button.

FAQ ID: 3057
Created: 12/17/2013
Modified: 12/17/2013
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(2.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5