How do I setup motion detection in the TV-302PI?

Login to the TV-IP302PI by entering http://192.168.10.30 into the address bar of your browser.

You will be prompted to log in to the camera. The default username is admin and the password is the one created during the initial installation.

Click Setup > Motion Detection.

Click Area 1, Area 2, or Area 3 then draw the motion detection area on the live screen.

FAQ ID: 2999
Created: 8/5/2013
Modified: 8/5/2013
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5