How do I change my default encryption key using the Powerline Utility?

Plug in your TPL-4052E adapters then connect your computer in to one of the devices. Open the utility and click PLC Network > Device Setup and change Private Network Name.  Once you have changed the Private Network Name click Set Local Device. Repeat for additional adapters.

FAQ ID: 2965
Created: 7/18/2013
Modified: 7/18/2013
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5