Why don’t I get a link when connecting a device to the switch?

GREENnet technology reduces power consumption by up to 70% when:*

  • Ethernet ports are not in use
  • Connected devices are turned off
  • Connected device are in power-saving modes
  • Based on Ethernet cable length

GREENnet technology requires feedback from the cable and the attached device. Please ensure you are using a Cat5E or higher cable for gigabit connections. Please also ensure that the quality of the cable is good and that it is connected securely.

*Max power savings compared with conventional TRENDnet Switches.

FAQ ID: 2844
Created: 10/30/2012
Modified: 10/30/2012
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5