Can I save video directly to a Secure Digital card?

Yes, the Secure Digital card will allow you to save video to it on motion detected and GPIO triggered events.

Log in to the camera by entering the camera’s IP address into your browser. The default IP address is http://192.168.10.30. The default username and password are both admin.

Click Setup then go to the Event Config >Motion trigger/GPIO trigger page. Place a check to enable it and then select Record to SD Card.





FAQ ID: 2543
Created: 10/3/2011
Modified: 10/3/2011
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5