Can I save video directly to a Secure Digital card?

The Secure Digital card will allow you to save video to it on motion detected events only. 

Log in to the camera by entering the camera’s IP address into your browser.  The default IP address is  The default username and password are both “admin”.

Click Setup then go to the Event Config >Motion trigger page.   Place a check to enable it and then select Record to SD Card.  You can access saved video on the SD card on the SD Card > File Manager page.

FAQ ID: 2466
Created: 5/24/2011
Modified: 5/24/2011
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5