How do I view the TV-IP602WN’s image using IPView Pro 2?

Once you have the camera configured on your network start IPView Pro 2.  If you are adding the first camera, skip to Step 3.   

If you have already added a camera previously do the following.

Click on the “Configure” button then click on the “Add Camera in local LAN” button.  It will search your network for any supported cameras and display a list of them.  Highlight the camera you want to view in IPView Pro 2, enter in the username and password and click “Ok, add this camera”.

Step 2:

Step 3:

FAQ ID: 2392
Created: 4/21/2011
Modified: 4/21/2011
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5