How can I configure my SecurView camera through the web-based configuration?

The camera’s web configuration page can be reached by entering its IP address into a web browser.  For example, if the IP address is 192.168.10.30 you would access it by opening Internet Explorer and entering http://192.168.10.30 into the address line.

FAQ ID: 2379
Created: 4/20/2011
Modified: 4/20/2011
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5