Can I shut off the IR lights when not in use?

Yes, they can be disabled. Log in to the camera by entering the camera’s IP address into your browser. The default IP address is The default username and password are both “admin”.

Click on Setup and then go to the Basic>System page. The IR LED control can be set to “off” here.

FAQ ID: 2307
Created: 4/11/2011
Modified: 4/11/2011
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5