How can I setup the camera using a Macintosh?

The camera can be configured from a Macintosh through its web-based configuration page. The camera’s web configuration page can be reached by entering its IP address into a web browser. For example, if the IP address is 192.168.10.30 you would access it by opening your web browser and entering http://192.168.10.30 into the address line.

Please note that if you are not using Internet Explorer that Active X components will not load. For example, setting up the motion detection windows is not possible without Active X support.

FAQ ID: 2302
Created: 4/11/2011
Modified: 4/11/2011
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5