How do I connect my TV-IP121W and TV-IP121WN to my wireless network?

Log in to the camera by entering the camera's IP address into your browser. The default IP address is The default username and password are both "admin".

After you have logged into the camera do the following.

-Click Setup.

-Click Network>Wireless.

-Click the Site Survey Button.

This will display a list of wireless networks in range of the camera. Select your network and configure the authentication parameters to match your existing wireless network settings. Then click “Apply”.

FAQ ID: 2289
Created: 4/11/2011
Modified: 4/11/2011
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5