How can I setup the camera using a Macintosh?

The camera can be configured from a Macintosh through its web-based configuration page. The camera’s web configuration page can be reached by entering its IP address into a web browser. For example, if the IP address is 192.168.10.30 you would access it by opening your web browser and entering 192.168.10.30 into the address line.

Please note that if you are not using Internet Explorer that Active X components will not load. For example, setting up the motion detection windows is not possible without Active X support.

FAQ ID: 2278
Created: 4/8/2011
Modified: 4/11/2011
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5