How do I reset the TPL-305E?

Reset the TPL-305E by pressing and holding in the reset button for approximately 10 seconds. The default network ID is HomePlugAV. You can synchronize the power line devices again by pressing and holding the sync button for 3 seconds on each unit.
FAQ ID: 2251
Created: 1/6/2011
Modified: 1/6/2011
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(3.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5