How do I upgrade the firmware on the TV-IP612WN and TV-IP612P?

Download the latest firmware updates from our website here.

http://www.trendnet.com/downloads/

Firmware Upgrade Procedures

  1. Go to camera’s configuration page directly via browser or using Setup Wizard to link. Enter user name and password when prompted. (default admin/admin)

  2. It is required to perform a factory reset procedure after loading the firmware to ensure the changes are taken correctly. Before doing so, it is recommend to save your settings by going to Tools/Backup and Restore section and click on Save Configuration and after firmware upgrade is loaded and unit is reset, go back to restore the saved configuration file (Load From Local HD).
  3. Navigate to the System/Firmware Upgrade section and browse to the firmware file and click Upload.

  4. After upgrade is complete, please perform a factory reset.

  5. Load the previous settings if any.
  6. Firmware upgrade complete.
FAQ ID: 2192
Created: 9/27/2010
Modified: 9/27/2010
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5