How can I setup the camera using a Macintosh?

The camera can be configured from a Macintosh through its web-based configuration page.  The camera’s web configuration page can be reached by entering its IP address into a web browser.  For example, if the IP address is 192.168.10.30 you would access it by opening your web browser and entering http://192.168.10.30 into the address line. 

Please note that if you are not using Internet Explorer that Active X components will not load.   For example, setting up the motion detection windows is not possible without Active X support.

FAQ ID: 1979
Created: 7/14/2009
Modified: 7/14/2009
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5