How do I connect my TV-IP422 (w) to my wireless network?

Log into the camera by entering the camera’s IP address into your browser.  The default IP address is http://192.168.10.30.  The default username and password are both “admin”.
Once you have logged into the camera do the following.
-Click Setup.

-Click Network>Wireless.

-Click the Site Survey Button.
This will display a list of wireless networks in range of the camera.  Select your network and configure the authentication parameters to match your existing wireless network settings.   Then click “Apply”.

FAQ ID: 1951
Created: 7/13/2009
Modified: 7/13/2009
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5