What is the TE100-MP1UN installation process?

  1. Install the print drivers onto the computer that you want to print to it.
  2. Insert the Utility CD
  3. Run the Setup Wizard
  4. Follow Setup Wizard instructions for USB connections, power, and Ethernet connections
  5. After all cables and LEDs are working properly click on the print server
  6. Configure the IP Address of the print server (Static or DHCP)
  7. Click Finish and run PC Install
  8. Follow InstallShield Wizard
  9. Click Finish
  10. Click on Resource from new pop up window and click Connect
  11. Follow Print Drive Wizard
  12. Click Ok. Installation is complete           
FAQ ID: 1766
Created: 12/19/2008
Modified: 12/19/2008
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5