Which network adapter should I use, TEG-ECTX or TEG-ECSX?

Use TEG-ECTX if connection to the network Switch is copper gigabit cable (IEEE 802.3ab standard). Use TEG-ECSX if connection to the network Switch is using multimode fiber with SC connector (IEEE 802.3z standard).
FAQ ID: 1739
Created: 11/13/2008
Modified: 11/13/2008
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5