How do I separate 2 VLANs but have a shared port between the VLANs?

Note: 
In this example resources  connected to ports 1, 2, 3 and 7 will only be able to access resources connected to those ports and nothing else on the Switch.  The same applies for ports 4, 5, 6 and 7. Devices and resources connected on the rest of the ports will also not be able to access any of those ports.

Step 1:  Create VID 2 with VLAN Name of two with ports 1, 2, 3 and 7. Note: VLAN Name can be anything. 

Step 2: Create VID 3 with VLAN Name of three with ports 4, 5, 6 and 7. Note: VLAN Name can be anything. 

Step 3: Create VID 4 with VLAN Name of four with ports 1, 2, 3, 4, 5, 6 and 7. Note: VLAN Name can be anything.

Step 4: Click on PVID and change the PVIDs for the ports to the following.

Port 1: 2
Port 2: 2
Port 3: 2
Port 4: 3
Port 5: 3
Port 6: 3
Port 7: 4

Step 5: Remove ports 1, 2, 3, 4, 5, 6 and 7 from the default VLAN.

FAQ ID: 1688
Created: 10/15/2008
Modified: 10/15/2008
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(5.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5