How do I configure the TWG-BRF114?

Click Start then click on the Control Panel.  For Windows 2000 click on Start, highlight settings then click on the Control Panel.
  1. Double-Click on the Network Connection icon.
  2. Right-Click on the Local Area Connection icon then click on Properties
  3. Highlight the Internet Protocol (TCP/IP) by single clicking on it then click on Properties.

  4. Select Obtain an IP address automatically and Obtain DNS server address automatically then click OK.

  5. Click OK again.

  6. Your computer is now ready to access and configure the TWG-BRF114.
  7. Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel.
FAQ ID: 1652
Created: 9/5/2008
Modified: 9/5/2008
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5