I chose Dynamic IP Address Configuration in the Current Network Information screen, but it does not update to an IP address that matches my network’s subnet. What should I do?

The IP address that appears in the Current Network Information screen is the default IP address of the TEW-637AP.  If you select Dynamic IP Address Configuration, the IP address will not be updated until you complete the configuration of the TEW-637AP. Continue on with the configuration.  When you reach the Confirm New Settings screen, the setup wizard will display an IP address that matches your network’s subnet. 

FAQ ID: 1626
Created: 8/19/2008
Modified: 8/19/2008
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(1.4)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5