Does TPL-302E actually transmit and receive at 200Mbps speed?

200Mbps is theoretical data transfer rate over the network. Actual data throughput varies due to data transfer overhead and environmental factors such as signal noise and network traffics. Power fluctuations can also influence the actual throughput of the unit. You must use TPL-302E throughout your Powerline network to ensure highest possible data transmission rate.
FAQ ID: 1567
Created: 4/28/2008
Modified: 4/28/2008
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5