I have a Wired Ethernet Router and I want to add Powerline for my Ethernet enabled computer in another room, what do I need?

To connect the remote computer you would require two TPL-202E Powerline Ethernet Bridges.

One TPL-202E Powerline Ethernet Bridge connects to a LAN port on the back of your Cable/DSL Internet Router (e.g. TW100-S4WICA) with a standard CAT-5 Ethernet cable. Next plug the TPL-202E into a power outlet.

The other TPL-202E connects to the remote computerís NIC (Network Interface Card) with a standard CAT-5 Ethernet cable. Next plug the TPL-202E into a power outlet.

Lastly, to secure your Powerline network use the included software utility to assign a network password.

FAQ ID: 1523
Created: 3/19/2008
Modified: 3/19/2008
Attachments
No attachments were found.

Options
Print this page
Email this to a friend

Rate
(0.0)
Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5